today an yesterday

yesterday -finished off the nogging using 190x45 msg8 timber,shot a stringline from one end to the other end so we could nog in a straight line.wee den used the clamps so it tighten the the grip between the joist so we could put a nog in with out having gaps in between. started helping the others by cutting nogs for them, most of my cuts were good..jus was given wrong measurements so i swaped around with micheal to take down the measurement, then marty told us to move the bearer cause it was off so we used the sabre saw to cut the nails from the joist an bearer,we then cut five more post to go dwn as piles to replace the wuns on the sole plate.the bearer moving was a success,
today -carried on from yesterday with the nogging,marty told me o fix up the straightness of the timber that some of the boys did,so i used my dougy to pull out the nails.after that i used some wedges to bringing upp the timer so it was leveled with the plate covering the subfloor,after that i planed down the wuns overlapping the edge.after that i helped owt richards side an fixed all there mistakes :)